Full field modal measurement with a single standard camera - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Optics and Lasers in Engineering Année : 2018

Full field modal measurement with a single standard camera

Clément Jailin

Résumé

The full field measurement of 8 vibration modes of a cantilever plate, up to the kHz frequency is performed using a single standard camera. The image acquisition is carried out at low rate but using fast exposure time (1/4000 s) that "freezes" a part of the motion. A deflectometry setup coupled with digital image correlation analysis allows angle fields, then deflection fields, to be measured. An out of plane displacement database is generated from all stored fields. This snapshot library is finally post-processed using principal component analysis techniques and adapted weights that enable space vibration fields to be extracted. A test case is performed on a reflecting cantilever steel plate. 370 deflection fields are measured allowing 8 space vibration fields to be extracted. The natural frequencies of those modes are estimated using the Rayleigh ratio. A coarse and visual comparison with a numerical simulation shows similar results for 6 of the 8 space modes.
Fichier principal
Vignette du fichier
OLE_draft.pdf (5.24 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-01762384 , version 1 (10-04-2018)

Identifiants

Citer

Clément Jailin. Full field modal measurement with a single standard camera. Optics and Lasers in Engineering, 2018, 107, pp.265-272. ⟨10.1016/j.optlaseng.2018.03.031⟩. ⟨hal-01762384⟩
113 Consultations
195 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More