Design of TE-polarized Bessel Antenna in Microwave Range Using Leaky-Wave Modes - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue IEEE Transactions on Antennas and Propagation Année : 2017

Design of TE-polarized Bessel Antenna in Microwave Range Using Leaky-Wave Modes

Résumé

In this paper, we present a Transverse Electric (TE) polarized Bessel-beam antenna in the microwave range based on a leaky radial waveguide. According to the dispersion equation, an inductive sheet over a ground plane is needed. To achieve the inductive sheet, a grid structure printed on a dielectric substrate is designed. Besides, the radial waveguide is coaxially fed with a quasi-loop shaped structure to excite TE mode. The proposed antenna is investigated by simulation and measurement. In the measurement, a small loop is used to probe near magnetic field, and accurate measured magnetic intensity profiles are presented. The measurements show that TE-polarized Bessel beams can be launched within the non-diffractive range of 145 mm (2.803 λ0) at 5.8 GHz.
Fichier non déposé

Dates et versions

hal-01628528 , version 1 (03-11-2017)

Identifiants

Citer

Ping Lu, Damien Voyer, Arnaud Bréard, Julien Huillery, Bruno Allard, et al.. Design of TE-polarized Bessel Antenna in Microwave Range Using Leaky-Wave Modes. IEEE Transactions on Antennas and Propagation, 2017, pp.32 - 41. ⟨10.1109/TAP.2017.2768584⟩. ⟨hal-01628528⟩
220 Consultations
0 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More