ECRH for JET: A feasibility study - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Fusion Engineering and Design Année : 2010

ECRH for JET: A feasibility study

M. Lennholm
  • Fonction : Auteur
G. Giruzzi
  • Fonction : Auteur
A. Parkin
  • Fonction : Auteur
F. Bouquey
  • Fonction : Auteur
H. Braune
  • Fonction : Auteur
A. Bruschi
  • Fonction : Auteur
Elena de La Luna
  • Fonction : Auteur
G. Denisov
  • Fonction : Auteur
T. Edlington
  • Fonction : Auteur
D. Farina
J. Farthing
  • Fonction : Auteur
Lorenzo Figini
  • Fonction : Auteur
  • PersonId : 1011165
S. Garavaglia
  • Fonction : Auteur
J. Garcia
  • Fonction : Auteur
Thomas Gerbaud
  • Fonction : Auteur
  • PersonId : 783054
  • IdRef : 134954211
G. Granucci
  • Fonction : Auteur
M. Henderson
  • Fonction : Auteur
L. Horton
  • Fonction : Auteur
W. Kasparek
  • Fonction : Auteur
P. Khilar
  • Fonction : Auteur
M. Jennison
  • Fonction : Auteur
N. Kirneva
  • Fonction : Auteur
D. Kislov
  • Fonction : Auteur
A. Kuyanov
  • Fonction : Auteur
X. Litaudon
  • Fonction : Auteur
A. Litvak
  • Fonction : Auteur
A. Moro
  • Fonction : Auteur
S. Nowak
  • Fonction : Auteur
V. Parail
  • Fonction : Auteur
B. Plaum
  • Fonction : Auteur
F. Rimini
  • Fonction : Auteur
G. Saibene
  • Fonction : Auteur
A. C. C. Sips
  • Fonction : Auteur
C. Sozzi
  • Fonction : Auteur
P. Spaeh
  • Fonction : Auteur
E. Trukhina
  • Fonction : Auteur
A. Vaccaro
  • Fonction : Auteur
V. Vdovin
  • Fonction : Auteur

Résumé

For JET to fulfil its mission in preparing ITER operation, the installation of an electron cyclotron resonance heating system on JET would be desirable. The study described in this paper has investigated the feasibility of installing such a system on JET. The principal goals of such a system are: current drive over a range of radii for NTM stabilization, sawtooth control and current profile tailoring and central electron heating to equilibrate electron and ion temperatures in high performance discharges. The study concluded that a 12 gyrotron, 10 MW, system at the ITER frequency (170 GHz) adapted for fields of 2.7-3.3 T would be appropriate for the operation planned in JET. An antenna allowing toroidal and poloidal steering over a wide range is being designed, using the ITER upper launcher steering mechanism. The use of ITER diamond windows and transmission line technology is suggested while power supply solutions partially reusing existing JET power supplies are proposed. Detailed planning shows that such a system can be operational in about 5 years from the time that the decision to proceed is taken. The cost and required manpower associated with implementing such a system on JET has also been estimated. (C) 2011 EURATOM. Published by Elsevier B.V. All rights reserved.Commiss European Communities, B-1049 Brussels, Belgium.IRFM, CEA, F-13108 St Paul Les Durance, France.Culham Sci Ctr, CCFE, Abingdon OX14 3DB, Oxon, England.EURATOM, Max Planck IPP, D-17491 Greifswald, Germany.EURATOM, CNR, Ist Fis Plasma, I-20125 Milan, Italy.Asociac EURATOM CIEMAT, Lab Nacl Fus, Madrid 28040, Spain.Inst Appl Phys, Nizhnii Novgorod 603155, Russia.Ecole Polytech, LPTP, F-91128 Palaiseau, France.ITER Org, F-13108 St Paul Les Durance, France.Univ Stuttgart, IPF, Stuttgart, Germany.RRC Kurchatov Inst, Moscow, Russia.Fus Energy, Barcelona 08019, Spain.Karlsruhe Inst Technol, Karlsruhe, Germany.
Fichier non déposé

Dates et versions

hal-01551007 , version 1 (29-06-2017)

Identifiants

Citer

M. Lennholm, G. Giruzzi, A. Parkin, F. Bouquey, H. Braune, et al.. ECRH for JET: A feasibility study. Fusion Engineering and Design, 2010, 6-8, pp.805 - 809. ⟨10.1016/j.fusengdes.2011.01.136⟩. ⟨hal-01551007⟩
93 Consultations
0 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More