A new method to fabricate Fe-TiC composite using conventional sintering and steam hammer - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue International Journal of Engineering Research in Africa Année : 2017

A new method to fabricate Fe-TiC composite using conventional sintering and steam hammer

Résumé

The aim of this research paper is to fabricate a Fe-TiC composite by a novel and simple manufacturing method. The latter is based on two cumulative processes; a conventional sintering (transient liquid phase sintering) and a hot forging with steam hammer respectively. The blinder phase of the studied simples is varied from carbon steel to high alloy steel using alloying additive powders. The obtained outcomes showed that after the sintering process, the relative density of the performed simples is improved from 86% to 95.8% without any densification process. Otherwise, in order to ensure maximum densification and enhance in addition the solubility of the alloying additives the hot forging process is then applied. Indeed, the final obtained composite product is a TiC-strengthened steel with a relative density around 99% (about 6.5 g/cm3 of density) wherein 30% (wt.) of spherical and semi-spherical TiC particles are homogeneously distributed in the metal matrix.
Fichier principal
Vignette du fichier
MSMP_2017_JERA_MONTAGNE.pdf (10.31 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-01538096 , version 1 (07-11-2017)

Identifiants

Citer

Ali Lahouel, Saïd Boudebane, Alain Iost, Alex Montagne. A new method to fabricate Fe-TiC composite using conventional sintering and steam hammer. International Journal of Engineering Research in Africa , 2017, 29, pp.28-44. ⟨10.4028/www.scientific.net/JERA.29.28⟩. ⟨hal-01538096⟩
148 Consultations
51 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More