High repetition rate (100 Hz), high peak power, high contrast femtosecond laser chain - Archive ouverte HAL Accéder directement au contenu
Communication Dans Un Congrès Année : 2016

High repetition rate (100 Hz), high peak power, high contrast femtosecond laser chain

Résumé

High intensity femtosecond laser are now routinely used to produce energetic particles and photons via interaction with solid targets. However, the relatively low conversion efficiency of such processes requires the use of high repetition rate laser to increase the average power of the laser-induced secondary source. Furthermore, for high intensity laser-matter interaction, a high temporal contrast is of primary importance as the presence of a ns ASE pedestal (Amplified Spontaneous Emission) and/or various prepulses may significantly affect the governing interaction processes by creating a pre-plasma on the target surface. We present the characterization of a laser chain based on Ti:Sa technology and CPA technique, which presents unique laser characteristics : a high repetition rate (100 Hz), a high peak power (> 5 TW) and a high contrast ratio (ASE<10(-10)) obtained thanks to a specific design with 3 saturable absorbers inserted in the amplification chain. A deformable mirror placed before the focusing parabolic mirror should allow us to focus the beam almost at the limit of diffraction. In these conditions, peak intensity above 1019W. cm(-2) on target could be achieved at 100 Hz, allowing the study of relativistic optics at a high repetition rate.
Fichier non déposé

Dates et versions

hal-01418484 , version 1 (16-12-2016)

Identifiants

Citer

R. Clady, V. Tcheremiskine, Y. Azamoum, A. Ferré, L. Charmasson, et al.. High repetition rate (100 Hz), high peak power, high contrast femtosecond laser chain. SOLID STATE LASERS XXV: TECHNOLOGY AND DEVICES, 2016, Unknown, Unknown Region. ⟨10.1117/12.2208018⟩. ⟨hal-01418484⟩
52 Consultations
0 Téléchargements

Altmetric

Partager

Gmail Mastodon Facebook X LinkedIn More