LQI-DCP : a LQI based multihop clustering protocol for wireless sensor networks - Archive ouverte HAL
Rapport (Rapport De Recherche) Année : 2010

LQI-DCP : a LQI based multihop clustering protocol for wireless sensor networks

Résumé

The Link Quality Indicator (LQI) is defined in the 802.15.4 standard, but its context of use is not specified in this standard. Some works on the LQI, few of which are field experiments, have shown that the LQI decreases as the distance increases. In WSN, it is not often desirable to use the GPS technology. Indeed, the use of GPS is expensive and may reduce the overall network performance. Moreover, indoor reception of the GPS signal is not possible. However, in cluster formation, it is quite important to sufficiently outspread the clusterheads (or caryommes) in order to improve the network efficiency. Therefore we propose a LQI based d-clustering protocol (LQIDCP) which produces clusters of which each clusterhead has a better positioning regarding the locations of other clusterheads. Simulation results show that the caryommes resulting from LQIDCP are sufficiently outspread. LQI-DCP also reduces the density of clusterheads and then improves the WSN energy efficiency, while each sensor remains still at less than d-hops from a caryomme
Fichier non déposé

Dates et versions

hal-01355172 , version 1 (22-08-2016)

Identifiants

  • HAL Id : hal-01355172 , version 1

Citer

Cherif Diallo, Michel Marot, Monique Becker. LQI-DCP : a LQI based multihop clustering protocol for wireless sensor networks. [Research Report] Dépt. Réseaux et Service de Télécom (Institut Mines-Télécom-Télécom SudParis); Services répartis, Architectures, MOdélisation, Validation, Administration des Réseaux (Institut Mines-Télécom-Télécom SudParis-CNRS). 2010, pp.13. ⟨hal-01355172⟩
77 Consultations
0 Téléchargements

Partager

More