Oligomers distribution at the gel point of tannin-formaldehyde thermosetting adhesives for wood panels - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Journal of Adhesion Science and Technology Année : 2013

Oligomers distribution at the gel point of tannin-formaldehyde thermosetting adhesives for wood panels

Résumé

Tannin-formaldehyde (TF) thermosetting wood adhesives for panel products for the building industry were examined to determine which oligomers were formed during the reaction between tannin and formaldehyde. The reaction products were examined by Matrix Assisted Laser Desorption/Ionization Time of Flight mass spectrometry. The analysis revealed that at the gel point, the adhesive was composed of unreacted flavonoid monomers and some oligomers, and due to reaction with formaldehyde, of methylolated tannin monomers and oligomers as well as flavonoids linked by methylene bridges. The slow gelling conditions used to prepare the TF hydrogel caused the unusual occurrence that not only the flavonoid units A-rings but also pyrogallol-type B-rings of the flavonoid units started to react with formaldehyde at the low pHs between 6 and 7 used for tannin adhesives and contributed to the network formed. This reaction was observed for the first time in this study.
Fichier non déposé

Dates et versions

hal-01296302 , version 1 (31-03-2016)

Identifiants

Citer

Antonio Pizzi, H. Pasch, Alain Celzard, A. Szczurek. Oligomers distribution at the gel point of tannin-formaldehyde thermosetting adhesives for wood panels. Journal of Adhesion Science and Technology, 2013, 27 (18-19, SI), pp.2094-2102. ⟨10.1080/01694243.2012.697669⟩. ⟨hal-01296302⟩
27 Consultations
0 Téléchargements

Altmetric

Partager

Gmail Mastodon Facebook X LinkedIn More