Prediction of auto-ignition temperatures and delays for gas turbine applications - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Journal of Engineering for Gas Turbines and Power Année : 2016

Prediction of auto-ignition temperatures and delays for gas turbine applications

Résumé

Gas turbines burn a large variety of gaseous fuels under elevated pressure and temperature conditions. During transient operations, variable gas/air mixtures are involved in the gas piping system. In order to predict the risk of auto-ignition events and ensure a safe operation of gas turbines, it is of the essence to know the lowest temperature at which spontaneous ignition of fuels may happen. Experimental auto-ignition data of hydrocarbon–air mixtures at elevated pressures are scarce and often not applicable in specific industrial conditions. Auto-ignition temperature (AIT) data correspond to temperature ranges in which fuels display an incipient reactivity, with timescales amounting in seconds or even in minutes instead of milliseconds in flames. In these conditions, the critical reactions are most often different from the ones governing the reactivity in a flame or in high temperature ignition. Some of the critical paths for AIT are similar to those encountered in slow oxidation. Therefore, the main available kinetic models that have been developed for fast combustion are unfortunately unable to represent properly these low temperature processes. A numerical approach addressing the influence of process conditions on the minimum AIT of different fuel/air mixtures has been developed. Several chemical models available in the literature have been tested, in order to identify the most robust ones. Based on previous works of our group, a model has been developed, which offers a fair reconciliation between experimental and calculated AIT data through a wide range of fuel compositions. This model has been validated against experimental auto-ignition delay times corresponding to high temperature in order to ensure its relevance not only for AIT aspects but also for the reactivity of gaseous fuels over the wide range of gas turbine operation conditions. In addition, the AITs of methane, of pure light alkanes, and of various blends representative of several natural gas and process-derived fuels were extensively covered. In particular, among alternative gas turbine fuels, hydrogen-rich gases are called to play an increasing part in the future so that their ignition characteristics have been addressed with particular care. Natural gas enriched with hydrogen, and different syngas fuels have been studied. AIT values have been evaluated in function of the equivalence ratio and pressure. All the results obtained have been fitted by means of a practical mathematical expression. The overall study leads to a simple correlation of AIT versus equivalence ratio/pressure.

Domaines

Génie chimique
Fichier principal
Vignette du fichier
GTP-15-1341.pdf (1.02 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-01241520 , version 1 (10-12-2015)

Identifiants

Citer

Roda Bounaceur, Pierre-Alexandre Glaude, Baptiste Sirjean, René Fournet, Pierre Montagne, et al.. Prediction of auto-ignition temperatures and delays for gas turbine applications. Journal of Engineering for Gas Turbines and Power, 2016, 138, pp.021505. ⟨10.1115/1.4031264⟩. ⟨hal-01241520⟩
193 Consultations
3261 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More