Influence of Relative Humidity on the Thermomechanical Behavior of PA6.6
Résumé
An experimental protocol was developed to achieve complete energy balances associated with low cycle fatigue (LCF) of a polyamide 6.6 matrix (PA6.6). The protocol involves quantitative infrared techniques (IRT), and digital speckle image correlation (DIC). IRT data were used with a local heat diffusion equation to estimate strain-induced heat sources, namely dissipation and coupling sources, while DIC enabled strain and stress assessments. Both techniques were then successfully combined to quantify deformation, dissipated and stored energies and then to estimate the Taylor-Quinney ratio that is widely used in plasticity. In this paper, the effects of loading frequency and relative humidity were investigated. It was shown that an increase of relative humidity resulted in a decrease in the mean stored energy rate per cycle, while the stored energy ratio was much smaller at low than at high loading frequency. In addition, it was found that this ratio could be negative at the last fatigue stage, just before macroscopic crack inception. These energy properties will act safeguards for the future development of a thermomechanical model of PA6.6 matrix behavior.
Domaines
Génie mécanique [physics.class-ph] Génie mécanique [physics.class-ph] Matériaux Matériaux et structures en mécanique [physics.class-ph] Matériaux et structures en mécanique [physics.class-ph] Mécanique des matériaux [physics.class-ph] Mécanique des matériaux [physics.class-ph] Thermique [physics.class-ph] Thermique [physics.class-ph]
Fichier principal
Influence_relative_humidity_Benaarbia_al_2014.pdf (2.01 Mo)
Télécharger le fichier
Origine | Fichiers produits par l'(les) auteur(s) |
---|
Loading...