Validity and limitations of linear analytical models for steel wire strands under axial loading, using a 3D FE model - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue International Journal of Mechanical Sciences Année : 2007

Validity and limitations of linear analytical models for steel wire strands under axial loading, using a 3D FE model

Résumé

In the field of cable modeling, many models have been proposed to describe the mechanical behavior of simple straight strands under axial loading, and the predictions of these models have been compared to experimental data when available. However, the validity domain of these models has not been evaluated yet because the experimental results reported in the literature are very limited. This problem is addressed here, the results from nine linear elastic models of a 6 + 1 wire single layered strand (simple straight strand) subjected to static axial loads being compared with values from 3D finite element modeling. The analytical models are shown to give satisfactory estimations of the elastic stiffness constants for lay angles below 20 degrees.
Fichier principal
Vignette du fichier
GMCD.pdf (801 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-01007419 , version 1 (21-11-2016)

Licence

Paternité

Identifiants

Citer

Seyed Reza Ghoreishi, Tanguy Messager, Patrice Cartraud, Peter Davies. Validity and limitations of linear analytical models for steel wire strands under axial loading, using a 3D FE model. International Journal of Mechanical Sciences, 2007, 49 (11), pp.1251-1261. ⟨10.1016/j.ijmecsci.2007.03.014⟩. ⟨hal-01007419⟩
748 Consultations
1363 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More