Dispersion of carbon nanotubes in polypropylene via multilayer coextrusion: Influence on the mechanical properties - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Polymer Année : 2013

Dispersion of carbon nanotubes in polypropylene via multilayer coextrusion: Influence on the mechanical properties

Résumé

Multilayer coextrusion was used to disperse Carbon Nanotubes (CNT) in polypropylene (PP). The dilution of commercially available masterbatches using a twin-screw extruder was first applied to produce several formulations, which were then mixed with PP using a multilayer coextrusion device to obtain films or pellets with CNT concentrations between 0.1 and 1%wt. The influence of the specific mechanical energy (SME) during the dilution step, of the addition of a compatibilizer, and of the multilayer tool on the CNT dispersion within the matrix was highlighted. The effect of the dispersion on the thermomechanical properties of the resulting materials was studied. We showed notably that films containing 0.2%wt CNT, 1%wt of PPgAm, prepared at high SME presented a Young's modulus increase of 25e30% without significant decrease in the elongation at break. These results, using low amounts of CNT and industrially available devices, may show a new path for producing nanocomposites.
Fichier principal
Vignette du fichier
PIMM-P-MIQUELARD-GARNIER-2013.pdf (886.86 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-00994511 , version 1 (21-05-2014)

Identifiants

Citer

Guillaume Miquelard-Garnier, Alain Guinault, D Fromonteil, S Delalande, Cyrille Sollogoub. Dispersion of carbon nanotubes in polypropylene via multilayer coextrusion: Influence on the mechanical properties. Polymer, 2013, 54 (16), pp.4290-4297. ⟨10.1016/j.polymer.2013.06.007⟩. ⟨hal-00994511⟩
111 Consultations
394 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More