Aims: In European Beech (Fagus sylvatica L.) large growth stresses lead to severe log end splitting that devaluate beech timber. Our study aimed at detecting relationships between growth stress and some morphology parameters in trees. Methods: Growth stress indicators were recorded for 440 mature trees in 9 stands from 5 European countries, together with morphology parameters. Results: Most trees displayed an uneven distribution of growth stress around the trunk. Moreover, growth stress intensity varied largely between individual trees. Geometry of the trunk was a poor predictor of growth stress intensity. Crown asymmetry resulted in a larger stress dissymmetry within trees. Trunk inclination was not correlated to mean or tension stress, contrary to what is usually found in younger trees. In the case of small inclination, growth stress was close to expected from biomechanics of restoring verticality. Trees exhibiting a larger inclination probably evolved a different mechanical solution: a rather large crown, lower tree slenderness and a sufficient asymmetry in growth stress as to prevent a higher inclination due to growth. Conclusion: A large slenderness is the best accurate predictor of a large growth stress, although variations in the ratio Height/DBH explained only 10% of the variability of growth stress. A large crown surface was the best predictor of a low level of growth stress. A large spacing between trees seems a good solution to lower the risk of growth stress in mature Beech.