Electrochemical determination of mesotrione at organoclay modified glassy carbon electrodes - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Talanta Année : 2013

Electrochemical determination of mesotrione at organoclay modified glassy carbon electrodes

Résumé

A natural Cameroonian smectite-type clay (SaNa) was exchanged with cationic surfactants, namely cetyltrimethylammonium (CTA) and didodecyldimethyl ammonium (DDA) modifying its physico-chemical properties. The resulting organoclays that have higher adsorption capacity for mesotrione than the pristine SaNa clay, have been used as modifiers of glassy carbon electrode for the electrochemical detection of this herbicide by square wave voltammetry. The stripping performances of SaNa, SaCTA and SaDDA modified electrodes were therefore evaluated and the experimental parameters were optimized. SaDDA gives the best results in deoxygenated acetate buffer solution (pH 6.0) after 2 min accumulation under open circuit conditions. Under optimal conditions, the reduction current is proportional to mesotrione concentration in the range from 0.25 to 2.5 μM with a detection limit of 0.26 μM. The fabricated electrode was also applied for the commercial formulation CALLISTO, used in European maize market.
Fichier non déposé

Dates et versions

hal-00795697 , version 1 (28-02-2013)

Identifiants

  • HAL Id : hal-00795697 , version 1

Citer

Josephine Kamga Wagheu, Claude Forano, Pascale Pascale Besse, P. Besse-Hoggan Besse-Hoggan, Ignas K. Tonle, Emmanuel Ngameni, et al.. Electrochemical determination of mesotrione at organoclay modified glassy carbon electrodes. Talanta, 2013, 103, pp.337-343. ⟨hal-00795697⟩
80 Consultations
0 Téléchargements

Partager

Gmail Mastodon Facebook X LinkedIn More