Fabrication of single crystalline diamond reinforced aluminum matrix composite by powder metallurgy route - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Metals and Materials International Année : 2011

Fabrication of single crystalline diamond reinforced aluminum matrix composite by powder metallurgy route

Résumé

We have successfully fabricated highly densified aluminum (Al)-diamond composite materials by a simple hot press method. The thermal conductivity of the Al-diamond composite materials was measured. These materials had different types, sizes and fractions of diamond. These obtained values were discussed based on theoretically calculated values. The thermal conductivity of the composite materials, measured by Laser-Flash method, was found to have slightly increased compared to that of pure bulk Al. The obtained microstructures of the composite materials showed a lot of cleavage existing in the interface between the Al matrix and the diamond particles, which led to the low increment of the thermal conductivity. Moreover, Al-diamond bulk materials with different sintering temperatures in solid state, liquid phase, and transient region between solid and liquid of Al, have been synthesized.

Domaines

Matériaux

Dates et versions

hal-00649584 , version 1 (08-12-2011)

Identifiants

Citer

Hansang Kwon, Marc Leparoux, Jean-Marc Heintz, Jean-François Silvain, Akira Kawasaki. Fabrication of single crystalline diamond reinforced aluminum matrix composite by powder metallurgy route. Metals and Materials International, 2011, 17 (5), pp.755-763. ⟨10.1007/s12540-011-1010-6⟩. ⟨hal-00649584⟩
40 Consultations
0 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More