Uniwavelength lidar sensitivity to spherical aerosol microphysical properties for the interpretation of Lagrangian stratospheric observations - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Journal of Atmospheric and Solar-Terrestrial Physics Année : 2009

Uniwavelength lidar sensitivity to spherical aerosol microphysical properties for the interpretation of Lagrangian stratospheric observations

Julien Jumelet
  • Fonction : Auteur
  • PersonId : 971747
Christine David
  • Fonction : Auteur
  • PersonId : 968785
Slimane Bekki
Philippe Keckhut
  • Fonction : Auteur
  • PersonId : 918122

Résumé

The determination of stratospheric particle microphysical properties from multiwavelength lidar, including Rayleigh and/or Raman detection, has been widely investigated. However, most lidar systems are uniwavelength operating at 532 nm. Although the information content of such lidar data is too limited to allow the retrieval of the full size distribution, the coupling of two or more uniwavelength lidar measurements probing the same moving air parcel may provide some meaningful size information. Within the ORACLE-O3 IPY project, the coordination of several ground-based lidars and the CALIPSO (Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation) space-borne lidar is planned during measurement campaigns called MATCH-PSC (Polar Stratospheric Clouds). While probing the same moving air masses, the evolution of the measured backscatter coefficient (BC) should reflect the variation of particles microphysical properties. A sensitivity study of 532 nm lidar particle backscatter to variations of particles size distribution parameters is carried out. For simplicity, the particles are assumed to be spherical (liquid) particles and the size distribution is represented with a unimodal log-normal distribution. Each of the four microphysical parameters (i.e. log-normal size distribution parameters, refractive index) are analysed separately, while the three others are remained set to constant reference values. Overall, the BC behaviour is not affected by the initial values taken as references. The total concentration (N0) is the parameter to which BC is least sensitive, whereas it is most sensitive to the refractive index (m). A 2% variation of m induces a 15% variation of the lidar BC, while the uncertainty on the BC retrieval can also reach 15%. This result underlines the importance of having both an accurate lidar inversion method and a good knowledge of the temperature for size distribution retrieval techniques. The standard deviation (σ) is the second parameter to which BC is most sensitive to. Yet, the impact of m and σ on BC variations is limited by the realistic range of their variations. The mean radius (rm) of the size distribution is thus the key parameter for BC, as it can vary several-fold. BC is most sensitive to the presence of large particles. The sensitivity of BC to rm and σ variations increases when the initial size distributions are characterized by low rm and large σ. This makes lidar more suitable to detect particles growing on background aerosols than on volcanic aerosols.

Dates et versions

hal-00352305 , version 1 (12-01-2009)

Identifiants

Citer

Julien Jumelet, Christine David, Slimane Bekki, Philippe Keckhut. Uniwavelength lidar sensitivity to spherical aerosol microphysical properties for the interpretation of Lagrangian stratospheric observations. Journal of Atmospheric and Solar-Terrestrial Physics, 2009, 71 (1), pp.121-131. ⟨10.1016/j.jastp.2008.09.038⟩. ⟨hal-00352305⟩
109 Consultations
0 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More