Ultrasonic measurement of anisotropy and temperature dependence of elastic parameters by a dry coupling method applied to a 6061-T6 alloy - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Ultrasonics Année : 2007

Ultrasonic measurement of anisotropy and temperature dependence of elastic parameters by a dry coupling method applied to a 6061-T6 alloy

Résumé

A pulse-echo ultrasonic method is presented to measure elastic parameter variations during thermal loading with high accuracy. Using a dry coupling configuration dedicated to high temperature investigation, this technique has been applied on 6061-T6 aluminium samples up to 220 °C. Experimental settings are described to assess the measurement reproducibility estimated at a value of 0.2%. Consequently, the anisotropy of this aluminium between the rolling direction and two orthogonal axes has been clearly detected and also measured versus temperature. As regards the temperature dependence of these elastic parameters, these results are compared with the estimations of the Young's modulus obtained during mechanical tests in conditions of low cycle fatigue (LCF). The same linear variation versus temperature is found but with a shift of 7 GPa. This difference has been classically attributed to systematic experimental error sources and to the distinction existing between dynamic and static elastic modulus.

Domaines

Electronique

Dates et versions

hal-00327538 , version 1 (08-10-2008)

Identifiants

Citer

F. Augereau, D. Laux, L. Allais, M. Mottot, C. Caes. Ultrasonic measurement of anisotropy and temperature dependence of elastic parameters by a dry coupling method applied to a 6061-T6 alloy. Ultrasonics, 2007, 46 (1), pp.34-41. ⟨10.1016/j.ultras.2006.10.002⟩. ⟨hal-00327538⟩
135 Consultations
0 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More