Gas bubbles in shaped sapphire - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Progress in Crystal Growth and Characterization Année : 2010

Gas bubbles in shaped sapphire

Résumé

Shaped sapphire single crystals almost always contain a typical defect: small bubbles also known as “micro-voids”. The goal of this paper is to review the existing literature and give a survey of our recent work on this specific defect. As a conclusion to our review we propose a mechanism for bubble formation and its occurrence and distribution in shaped sapphire. The bubbles contain CO which originates as a result of complex reactions between the molten alumina, Mo crucible and graphite pieces. The CO dissolves in the molten alumina and is probably present as a saturated solution whatever the growth conditions. Then the dissolved gas is rejected at the solid–liquid interface and bubble nucleation occurs where the concentration of CO is highest. Therefore, the location of the bubbles in the crystal is governed by the hydrodynamics in the meniscus, which include Marangoni convection. The bubble is finally incorporated in the crystal when it reaches a critical size which depends only on the growth rate. When a central capillary channel is used, the bubbles are located in a layer close to the surface of the crystal from where they can be easily removed by polishing. Also, all the literature agrees on the fact that interface destabilization at high velocity results in the presence of bubbles throughout the entire crystal and should be avoided.

Dates et versions

hal-00142618 , version 1 (20-04-2007)

Identifiants

Citer

O.M. Bunoiu, Th. Duffar, I. Nicoara. Gas bubbles in shaped sapphire. Progress in Crystal Growth and Characterization, 2010, 56 (3-4), pp.123-145. ⟨10.1016/j.pcrysgrow.2010.09.001⟩. ⟨hal-00142618⟩
30 Consultations
0 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More