Energy Recovery DC/AC Converter for Piezoelectric Transformer - Pôle CSEE - SATIE Accéder directement au contenu
Communication Dans Un Congrès Année : 2014

Energy Recovery DC/AC Converter for Piezoelectric Transformer

Résumé

Piezoelectric transformers have been used successfully in DC/AC or DC/DC converter. However, the use of piezoelectric transformers presents a major challenges for power electronic design: the capacitive nature of such devices makes their use delicate as the instantaneous power may be much greater than the average effective power. Due to this challenge, conventional drive circuits, especially inductor, become too bulky. This work describes a converter suitable to drive piezoelectric transformer with low inductor. The proposed converter is a DC/AC structure, which is capable of producing a unipolar square voltage. The circuit provides for recovery of the energy stored on the clamped capacitance back to the primary power supply when the transformer is de-energized. In our design, an auxiliary shunt circuits are connected to the input terminal. The proposed structure of both theoretical and experimental validations has demonstrated the effectiveness of the proposed technique for recovery energy.
Fichier principal
Vignette du fichier
EPE 2014 Paper.pdf (473.63 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-01697581 , version 1 (31-01-2018)

Identifiants

Citer

Dejan Vasic, François Costa. Energy Recovery DC/AC Converter for Piezoelectric Transformer. 2014 16th European Conference on Power Electronics and Applications (EPE'14-ECCE Europe), Aug 2014, Lappeenranta, Finland. ⟨10.1109/EPE.2014.6910954⟩. ⟨hal-01697581⟩
250 Consultations
275 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More