Mg2Si, Mg2(Si,Sn) and diffusion barriers deposited as thin films by microwave plasma-assisted co-sputtering for automotive thermoelectric applications - Archive ouverte HAL Accéder directement au contenu
Thèse Année : 2015

Mg2Si, Mg2(Si,Sn) and diffusion barriers deposited as thin films by microwave plasma-assisted co-sputtering for automotive thermoelectric applications

Mg2Si, Mg2(Si,Sn) et barrières de diffusion déposées en couches minces par co-pulvérisation assistée par plasma micro-onde pour des applications thermoélectriques pour l'automobile

Résumé

In this thesis are presented the deposition of thin films by microwave plasma-assisted co­sputtering and their characterization within the context of thermoelectric applications. The aims of the work are split into two categories: the investigation of Mg2Si and Mg2(Si,Sn) thin films in terms of their potential to be implemented in a miniaturized thermoelectric module and the inquiry of materials which may act as diffusion barriers at the interface between Mg2Si-based thermoelements and the brazing joints used in the preparation of electrical contacts. In the first part of the work, thin films of Mg2(Si,Sn) solid solutions with a stoichiometry close to Mg2Si0.4Sn0.6 have been deposited on various substrates. The thermo­mechanical properties of these films have been investigated with respect to their dependence on the deposition process and the nature of the substrate on which they are grown, while the thermal stability and reactivity with the substrates at intermediate temperatures based on their composition has been explored. Furthermore, the transport properties of Sb-doped Mg2Si thin films have been also characterized. This was done in the context of finding the evolution and dependence of the thermoelectric properties (Seebeck coefficient, electrical and thermal conductivities) to the level of texturing within the thin film. The second part of this thesis involves the deposition of diffusion barriers on bulk Bi-doped Mg2(Si,Ge) thermoelements in order to disrupt the diffusion and reactivity between the thermoelectric leg and the Al-Si alloy-based brazing joint and to obtain a chemically stable, low resistive electrical contact. With this objective, two options have been pursued. One is based on the deposition of gradient layers that are meant to gradually inverse the composition from the Mg2(Si,Ge) thermoelements to a top layer of Ni that is used in the deposition of the potential diffusion barrier. The other option concerns the deposition of a M/Ni bi­layer on the TE legs, where M is a metallic layer (Ti, Ta, W or Cr). Overall, the work presented here offers a glimpse of the potential use of Mg2Si and Mg2(Si,Sn) thin films in the making of a miniaturized thermoelectric module and the efficiency of various materials as diffusion barriers in the industry of thermoeletrics.
Cette thèse concerne le dépôt de couches minces par la méthode de co-pulvérisation assistée par plasma micro-onde dans le contexte de leurs applications potentielles pour la thermoélectricité. Deux volets principaux ont été développés au cours de ce travail: la synthèse et l'étude des propriétés de couches minces à base de Mg2Si et Mg2(Si,Sn) pour une mise en œuvre au sein de modules thermoélectriques miniaturisés, et l'étude de matériaux susceptibles d’agir comme barrières de diffusion entre un thermoélément à base de Mg2Si et les joints de brasage utilisés pour connecter les contacts électriques. Dans la première partie de l'ouvrage, des couches minces de solutions solides de Mg2(Si,Sn), avec une stœchiométrie proche de Mg2Si0.4Sn0.6, ont été déposées sur différents substrats. Les propriétés thermomécaniques de ces couches ont été étudiées en fonction du processus de dépôt et de la nature du substrat, tandis que la stabilité thermique et la réactivité avec les substrats ont été examinées, ont fonction de la composition, dans le domaine de températures intermédiaires. En outre, les propriétés de transport des couches minces de Mg2Si dopé au Sb ont été caractérisées, en s’intéressant, en particulier, à l’effet de la texturation de la couche mince sur les propriétés thermoélectriques (coefficient Seebeck, conductivité électrique et thermique). La deuxième partie de cette thèse est dédiée au dépôt de couches barrières sur des échantillons massifs de Mg2(Si,Ge) dopés Bi afin de limiter la diffusion et la réactivité entre le thermoélément et le joint de brasage à base d'alliage Al-Si dans le but d’obtenir un contact électrique chimiquement stable et de faible résistance. Deux options ont été étudiées : l'une est basée sur des couches à gradient destinées à ajuster progressivement la composition entre celle du thermoélément et une couche supérieure de Ni qui constitue la barrière de diffusion. L'autre option concerne les bi-couches M/Ni, où M est un métal (Ti, Ta, W ou Cr). Globalement, le travail présenté ici offre un aperçu du potentiel des couches minces à base de Mg2Si et Mg2(Si,Sn) dans la réalisation d'un module thermoélectrique miniaturisé et l'étude de faisabilité de différents matériaux comme barrières de diffusion dans des modules conventionnels.
Fichier principal
Vignette du fichier
PRAHOVEANU_2015_archivage(2).pdf (11.58 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)
Loading...

Dates et versions

tel-02001974 , version 1 (31-01-2019)

Identifiants

  • HAL Id : tel-02001974 , version 1

Citer

Codrin Prahoveanu. Mg2Si, Mg2(Si,Sn) and diffusion barriers deposited as thin films by microwave plasma-assisted co-sputtering for automotive thermoelectric applications. Materials. Université Grenoble Alpes, 2015. English. ⟨NNT : 2015GREAI091⟩. ⟨tel-02001974⟩
293 Consultations
230 Téléchargements

Partager

Gmail Facebook X LinkedIn More