Ultralow-intensity noise, 10 W all-fiber single-frequency tunable laser system around 1550 nm - Archive ouverte HAL
Article Dans Une Revue Applied optics Année : 2021

Ultralow-intensity noise, 10 W all-fiber single-frequency tunable laser system around 1550 nm

Résumé

We report herein on the development of a linearly polarized, single-frequency tunable laser system producing more than 10 W in the 1550 nm range, using a two-stage erbium/ytterbium co-doped fiber-based master oscillator power amplifier (MOPA) architecture. The all-fiber MOPA provides an ultralow intensity noise of − 160 dBc/Hz beyond 200 kHz between 1533 and 1571 nm (Δλ = 38 nm ) at full output power and a minimum optical signal to noise ratio of 38 dB. A good stability is obtained over 4 h at maximum power for several wavelengths with peak-to-peak fluctuation less than 3% and rms below 0.5%.
Fichier principal
Vignette du fichier
osa-applied-optics-resubmission.pdf (1.62 Mo) Télécharger le fichier
Origine Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-04690841 , version 1 (10-09-2024)

Identifiants

Citer

Dia Darwich, Yves-Vincent Bardin, Mathieu Goeppner, Clément Dixneuf, Germain Guiraud, et al.. Ultralow-intensity noise, 10 W all-fiber single-frequency tunable laser system around 1550 nm. Applied optics, 2021, 60 (27), pp.8550-8555. ⟨10.1364/AO.435274⟩. ⟨hal-04690841⟩
66 Consultations
25 Téléchargements

Altmetric

Partager

More