Extension of the source scanning technique to curved rectangular panels for the vibroacoustic characterization of structures using wall-pressure plane waves
Résumé
The Source Scanning Technique (SST) is an experimental method used to synthesize the vibroacoustic response
of a given structure under random excitations such as the Diffuse Acoustic Field (DAF) and the Turbulent
Boundary Layer (TBL) using a single monopole source. It was previously developed and validated for simple
plane structures such as Flat Rectangular Panels (FRPs). However, in industrial cases, the structures of interest
can be more complex. In this paper, the feasibility of the extension of SST to Curved Rectangular Panels
(CRPs) is investigated. To numerically evaluate the performances of SST when generating wall-pressure plane
waves (WPPWs) on CRPs, analytical developments are proposed to estimate the transfer functions between
the monopole source and the CRPs. Two- and three-dimensional cases are considered and validated using the
boundary element method. Then, parametric studies are carried out to determine the optimal parameters for
implementing the SST process in two- and three-dimensional cases considering a conformal geometry, i.e., the
array of monopoles has the same geometry as the structure of interest. The numerical results obtained are then
supported by experimental investigations using a robotized system to move the monopole source. The transfer
functions obtained using the proposed analytical models are compared to the measured ones, yielding relatively
good agreement between the results
Domaines
Sciences de l'ingénieur [physics]
Fichier principal
Applied_Acoustics_2024_Pouye_Maury_Maxit_Source_Scanning_Technique_on_curved_panels.pdf (4.69 Mo)
Télécharger le fichier
Origine | Fichiers produits par l'(les) auteur(s) |
---|