Regeneration of Sooty Surface Using Nanosecond Pulsed Dielectric Barrier Discharge - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue IEEE Transactions on Industry Applications Année : 2017

Regeneration of Sooty Surface Using Nanosecond Pulsed Dielectric Barrier Discharge

Résumé

In this paper, the regeneration of sooty surface by using nanosecond pulsed surface dielectric barrier discharge type reactor is investigated experimentally. The goal is to characterize the regeneration process as a function of the applied voltage magnitude and pulse polarity. The reactor is composed of two electrodes separated by a dielectric and are arranged asymmetrically. The power supply system provides high voltage pulses with the following characteristics: voltage up to ±10 kV; rise and decay time less than 50 ns; and a frequency of 2 kHz. The main results show that the regeneration performance increases with the applied voltage magnitude and the duration of treatment. Furthermore, depending on the polarity and the magnitude of the applied voltage pulse, the cleaned surface area can be either more uniform along the active electrode (negative pulses) or extended on the dielectric surface (positive pulses). The regeneration mechanism remains not very well understood, but it seems that the soot particle size is reduced mainly due to the interaction with ozone molecules and oxygen radicals generated by the discharge.
Fichier non déposé

Dates et versions

hal-04484593 , version 1 (29-02-2024)

Identifiants

Citer

Noureddine Zouzou, Arthur Claude Abaa Ndong, Eric Moreau. Regeneration of Sooty Surface Using Nanosecond Pulsed Dielectric Barrier Discharge. IEEE Transactions on Industry Applications, 2017, 53 (4), pp.3982-3988. ⟨10.1109/TIA.2017.2682168⟩. ⟨hal-04484593⟩
8 Consultations
0 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More