Piezoelectric Materials for the DC-DC Converters Based on Piezoelectric Resonators - Archive ouverte HAL Accéder directement au contenu
Communication Dans Un Congrès Année : 2021

Piezoelectric Materials for the DC-DC Converters Based on Piezoelectric Resonators

Résumé

This paper presents a generic representation of the six switching sequences of the dc-dc converters based on piezoelectric resonators. In addition, the estimation of current density and voltage limitations of lead zirconate titanate and lithium niobate resonators are given. A comparison between these piezoelectric materials is carried out. Then, we propose a lithium niobate-based piezoelectric resonator design that reduces spurious modes, while providing a quality factor of 3700 and an electromechanical coupling factor k t 2 of 25.5 %. Experimental results demonstrate the operating principle for input-output voltage of 60-20 V around 6 MHz for a wide power range 2-32 W. A peak efficiency of 93.6 % is obtained at 16 W. A power density of 128 W/cm 3 for the designed resonator is reached for input-output voltage of 60-20 V.
Fichier principal
Vignette du fichier
2022-11-09 - Paper_40.pdf (2.06 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-04451239 , version 1 (05-03-2024)

Identifiants

Citer

Mustapha Touhami, Ghislain Despesse, Thierry Hilt, Marie Bousquet, Alexandre Reinhardt, et al.. Piezoelectric Materials for the DC-DC Converters Based on Piezoelectric Resonators. IEEE 22nd Workshop on Control and Modelling of Power Electronics (COMPEL 2021), Nov 2021, Carthagène, Colombia. ⟨10.1109/COMPEL52922.2021.9645999⟩. ⟨hal-04451239⟩
38 Consultations
5 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More