OBIC Analysis of Different Edge Terminations of Planar 1.6 kV 4H-SiC Diodes - Archive ouverte HAL
Article Dans Une Revue Materials Science Forum Année : 2007

OBIC Analysis of Different Edge Terminations of Planar 1.6 kV 4H-SiC Diodes

Résumé

High voltage SiC semiconductor devices have been successfully fabricated and some of them are commercially available [1]. To achieve experimental breakdown voltage values as close as possible to the theoretical value, i.e. value of the theoretical semi-infinite diode, it is necessary to protect the periphery of the devices against premature breakdown due to locally high electric fields. Mesa structures and junction termination extension (JTE) as well as guard rings, and combinations of these techniques, have been successfully employed. Each of them has particular drawbacks. Especially, JTE are difficult to optimize in terms of impurity dose to implant, as well as in terms of geometric dimensions. This paper is a study of the spreading of the electric field at the edge of bipolar diodes protected by JTE and field rings, by optical beam induced current.
Fichier principal
Vignette du fichier
rev_52.pdf (402.58 Ko) Télécharger le fichier
Origine Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-04369314 , version 1 (02-01-2024)

Identifiants

Citer

Christophe Raynaud, Daniel Loup, Phillippe Godignon, Raul Perez Rodriguez, Dominique Tournier, et al.. OBIC Analysis of Different Edge Terminations of Planar 1.6 kV 4H-SiC Diodes. Materials Science Forum, 2007, MATERIALS SCIENCE FORUM, 556-557, pp.1007-1010. ⟨10.4028/www.scientific.net/MSF.556-557.1007⟩. ⟨hal-04369314⟩
20 Consultations
9 Téléchargements

Altmetric

Partager

More