3D Printing‐Enabled Design and Manufacturing Strategies for Batteries: A Review - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Small Année : 2023

3D Printing‐Enabled Design and Manufacturing Strategies for Batteries: A Review

Mohammad Hassan
  • Fonction : Auteur
Maryam Al-Ejji
  • Fonction : Auteur

Résumé

Lithium‐ion batteries (LIBs) have significantly impacted the daily lives, finding broad applications in various industries such as consumer electronics, electric vehicles, medical devices, aerospace, and power tools. However, they still face issues (i.e., safety due to dendrite propagation, manufacturing cost, random porosities, and basic & planar geometries) that hinder their widespread applications as the demand for LIBs rapidly increases in all sectors due to their high energy and power density values compared to other batteries. Additive manufacturing (AM) is a promising technique for creating precise and programmable structures in energy storage devices. This review first summarizes light, filament, powder, and jetting‐based 3D printing methods with the status on current trends and limitations for each AM technology. The paper also delves into 3D printing‐enabled electrodes (both anodes and cathodes) and solid‐state electrolytes for LIBs, emphasizing the current state‐of‐the‐art materials, manufacturing methods, and properties/performance. Additionally, the current challenges in the AM for electrochemical energy storage (EES) applications, including limited materials, low processing precision, codesign/comanufacturing concepts for complete battery printing, machine learning (ML)/artificial intelligence (AI) for processing optimization and data analysis, environmental risks, and the potential of 4D printing in advanced battery applications, are also presented.
Fichier principal
Vignette du fichier
Small - 2023 - Fonseca - 3D Printing‐Enabled Design and Manufacturing Strategies for Batteries A Review.pdf (9.15 Mo) Télécharger le fichier
Origine : Publication financée par une institution
Licence : CC BY - Paternité

Dates et versions

hal-04186744 , version 1 (13-11-2023)

Licence

Paternité

Identifiants

Citer

Nathan Fonseca, Sri Vaishnavi Thummalapalli, Sayli Jambhulkar, Dharneedar Ravichandran, Yuxiang Zhu, et al.. 3D Printing‐Enabled Design and Manufacturing Strategies for Batteries: A Review. Small, 2023, ⟨10.1002/smll.202302718⟩. ⟨hal-04186744⟩
32 Consultations
43 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More