Grain growth modeling for gas pressure sintering of silicon nitride based ceramics - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Materials Today Communications Année : 2022

Grain growth modeling for gas pressure sintering of silicon nitride based ceramics

Résumé

The complexity of liquid phase sintering of silicon nitride implies the use of advanced gas pressure sintering (GPS) industrial process. Sintering additives have been jointly developed to allow the sintering of this challenging material to reach high mechanical properties. The latter properties and GPS process of silicon nitride are strongly influenced by the microstructure development during the thermal treatment under temperature close to 1800°C. In particular, grain growth is a key parameter that needs to be identified. In this work, an experimental design is used to explore microstructural development during the final stage of sintering. The grain size, and porosity data are extracted for different holding times and temperatures to allow the identification of the experimental grain growth. The study is extended to the impact of the heating kinetics regime and the influence of the gas pressure furnace environment.
Fichier principal
Vignette du fichier
GRIPPI_Grain_Growth_postrev_ref_clean.pdf (1.29 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-03940287 , version 1 (16-01-2023)

Identifiants

Citer

Thomas Grippi, Stéphanie Béhar-Lafenetre, Holger Friedrich, Daniel Haas, Uwe Schenderlein, et al.. Grain growth modeling for gas pressure sintering of silicon nitride based ceramics. Materials Today Communications, 2022, 34, pp.105189. ⟨10.1016/j.mtcomm.2022.105189⟩. ⟨hal-03940287⟩
22 Consultations
43 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More