Oxygen plasma functionalization of poly(p-phenilene sulphide) - Archive ouverte HAL
Article Dans Une Revue Applied Surface Science Année : 2007

Oxygen plasma functionalization of poly(p-phenilene sulphide)

Résumé

Surface effects during plasma activation of poly(p-phenilene sulphide)—PPS have been studied. Samples that were exposed to weakly ionized highly dissociated oxygen plasma created an inductively coupled radiofrequency discharge with the power of 100 W. The electron density and temperature were measured with a double Langmuir probe and were 4 × 1015 m−3 and 3 eV, respectively, while the neutral atom density was measured with a fiber optics catalytic probe and was 4 × 1021 m−3. The surface tension was determined by measuring the contact angle of deionized water, while the appearance of surface functional groups was detected by XPS. The surface tension of untreated PPS was 7 × 10−3 N/m or/and increased to 7 × 10−2 N/m in few seconds of plasma treatment. It remained fairly constant for longer plasma treatments. The XPS survey spectrum showed little oxygen on untreated samples, but its concentration increased to about 20 at.% in few seconds. Detailed high resolution XPS C 1s peak showed that the carbon was left fairly stable during plasma treatment. The main functional groups formed were rather sulphate in sulphite groups, as determined from high resolution S 2p peak. Namely, a strong transition from sulphide to sulphate state of sulfur was observed. The spontaneous deactivation of the polymer surface was measured as well. The deactivation was fairly logarithmic with the characteristic decay time of several hours.

Dates et versions

hal-03812973 , version 1 (13-10-2022)

Identifiants

Citer

Uroš Cvelbar, Miran Mozetič, Ita Junkar, Alenka Vesel, Janez Kovac, et al.. Oxygen plasma functionalization of poly(p-phenilene sulphide). Applied Surface Science, 2007, 253 (21), pp.8669-8673. ⟨10.1016/j.apsusc.2007.04.074⟩. ⟨hal-03812973⟩
10 Consultations
0 Téléchargements

Altmetric

Partager

More