Design and implementation of a cable-driven parallel robot for additive manufacturing applications - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Mechatronics Année : 2022

Design and implementation of a cable-driven parallel robot for additive manufacturing applications

Résumé

This paper presents a new 6 degree-of-freedom cable-driven parallel robot fully constrained by 8 cables. This robot should perform medium size 3D part printing. Its distinguishing feature is a radial cable winding that is relevant due to the small cable diameter (0.54 mm) and the maximum cable length (1.732 m, 1 m cube diagonal). This winding solution has the advantage of being compact and easy to design. The robot trajectory planning uses a full geometric model of the pulley and winding system which is introduced in this paper. The cable elasticity is taken into account in the geometric model to increase the tool path following accuracy. Robot dynamic performances are analysed for two different mobile platform geometries. From this analysis, we obtained an end-effector trajectory tracking error of less than 0.4 mm for a feedrate speed of 0.1 m/s.
Fichier principal
Vignette du fichier
article_170822.pdf (9.05 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-03752992 , version 1 (17-08-2022)

Licence

Paternité - Pas d'utilisation commerciale - Pas de modification

Identifiants

Citer

Damien Gueners, Hélène Chanal, Belhassen-Chedli Bouzgarrou. Design and implementation of a cable-driven parallel robot for additive manufacturing applications. Mechatronics, 2022, 86, pp.102874. ⟨10.1016/j.mechatronics.2022.102874⟩. ⟨hal-03752992⟩
90 Consultations
230 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More