A calibration bench to validate systematic error compensation strategies in hole drilling measurements - Archive ouverte HAL
Communication Dans Un Congrès Année : 2022

A calibration bench to validate systematic error compensation strategies in hole drilling measurements

Résumé

An accurate estimation of the measurement error in the hole drilling method is needed to choose an appropriate level of regularization and to perform a sensitivity analysis on the stress results. Latest release of ASTM E837 standard for the hole drilling method includes a procedure aimed at estimating the standard deviation of the random error component on strain measurements, proposed by Schajer. Nevertheless, strain measurements are also affected to some extent by systematic errors which are not included in the estimation and need to be compensated. For example, an error in the rosette gage factor or in the identification of the zero-depth point systematically affects all strain measurements in a strongly correlated fashion. This paper describes a calibration bench, designed to superimpose a reference bending stress distribution on a given specimen while simultaneously performing a hole drilling measurement. Since the reference solution is known a priori and shares the measurement instrumentation, the hole geometry and the stepping process with the actual residual stress distribution, the bench provides the user with a direct validation of the obtained accuracy. In addition, strategies aimed at compensating systematic errors can be tested on the reference solution and then applied on the residual stress evaluation. Two bias correction strategies are discussed and validated on a 7075-T651 aluminum specimen. It is observed that the imperfect hole geometry and drilling alignment lead to a significant underestimation of stresses near the surface. With the proposed bench, it is shown that this effect can be corrected.
Fichier principal
Vignette du fichier
BeghiniGrossiSantusValentini_ICRS11_Final.pdf (1.28 Mo) Télécharger le fichier
Origine Fichiers produits par l'(les) auteur(s)
Licence

Dates et versions

hal-03721795 , version 1 (13-07-2022)
hal-03721795 , version 2 (31-10-2023)

Licence

Identifiants

  • HAL Id : hal-03721795 , version 1

Citer

Marco Beghini, Tommaso Grossi, Ciro Santus, Emilio Valentini. A calibration bench to validate systematic error compensation strategies in hole drilling measurements. ICRS 11 – 11th International Conference on Residual Stresses, SF2M; IJL, Mar 2022, Nancy, France. ⟨hal-03721795v1⟩

Collections

ICRS11
95 Consultations
387 Téléchargements

Partager

More