Investigation of the effect of three-point bending testing parameters on the behavior of 3D printed sand - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue International Journal of Advanced Manufacturing Technology Année : 2022

Investigation of the effect of three-point bending testing parameters on the behavior of 3D printed sand

Walid Fekih Ahmed
  • Fonction : Auteur
Mohamed Ben
  • Fonction : Auteur
Hadj Sghaier
  • Fonction : Auteur

Résumé

3D sand mold printing allows rapid and direct fabrication of complex-shaped molds and cores that helps to overcome the limitations of conventional casting. The manufactured molds and cores, having complex geometries, are subjected to severe thermomechanical loads during casting and thus must have sufficient rigidity to meet the technical requirements. Therefore, a mastery of their behavior and intrinsic sand properties becomes essential for a better dimensioning of molds and cores but also the simulation of casting processes. The bending is the most critical load type, for sand cores under casting conditions, and therefore needs to be characterized. This study proposes to investigate the effect of testing parameters, which are spanto-thickness and strain rate, on the three-point bending behavior of printed sand. The results showed that the elastic modulus increases with the rise of the span-to-thickness parameter and is not affected by the strain rate. The bending strength, for its part, is only affected by strain rate. The test results and DIC measurement made it possible to give recommendation for the optimal testing parameters.
Fichier principal
Vignette du fichier
JAMT-Sable imprimé.pdf (1.19 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-03700178 , version 1 (21-06-2022)

Identifiants

Citer

Walid Fekih Ahmed, Mohamed Ben, Hadj Sghaier, Samir Allaoui. Investigation of the effect of three-point bending testing parameters on the behavior of 3D printed sand. International Journal of Advanced Manufacturing Technology, 2022, 121 (1-2), pp.1415-1428. ⟨10.1007/s00170-022-09418-3⟩. ⟨hal-03700178⟩

Collections

URCA ITHEMM
29 Consultations
487 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More