In modern audio systems, real-time digital signal processing algorithms are widely used for a variety of applications. The possibility of using a simple electronic circuit for variety of research projects has shown remarkable potential and is gradually attracting more and more attention from researchers and engineers. This contribution describes a design of such a board used in the framework of a PhD thesis whose subject is centred on the real-time correction of loudspeaker nonlinearities. The solution chosen in this work is based on a Teensy 3.6 microcontroller which is easy to program using the Arduino IDE and the libraries provided by Teensy. Two solutions are provided : one with an Audio board available on the market and another with a homemade board. Both solutions contain two inputs and at least one output (all 16 bits). This contribution does not detail the compensation algorithm related to the loudspeaker nonlinearities but focuses on the boards design, comparison of proposed solutions, and provides the basic codes to perform the real-time digital signal processing.