Optimized ICPCVD-Based TiO2 for Photonics - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Materials Année : 2022

Optimized ICPCVD-Based TiO2 for Photonics

Résumé

We propose obtaining TiO2 films by ICPCVD for the fabrication of low-loss waveguides. The challenge is to produce a dense and homogeneous layer with a high refractive index and low absorption in the visible range. Crystallized layers with features such as grains and amorphous layers have a rather low index for the application targeted, so we aimed for an intermediate state. We investigated the influence of plasma power, pressure, deposition time and annealing temperature on the structural, crystalline, and optical properties in order to tailor them. We showed that crystallization into rutile at the nanoscale occurred during deposition and under wisely chosen conditions, we reached a refractive index of 2.5 at 630 nm without creating interfaces or inhomogeneity in the layer depth. Annealing permits one to further increase the index, up to 2.6. TEM analysis on one sample before and after annealing confirmed the nano-polycrystallization and presence of both anatase and rutile phases and we considered that this intermediate state of crystallization was the best compromise for guided optics.
Fichier principal
Vignette du fichier
materials-15-02578.pdf (3.05 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-03627764 , version 1 (01-04-2022)

Licence

Paternité

Identifiants

Citer

Aurore Andrieux, Marie-Maxime Mennemanteuil, Nicolas Geoffroy, Mélanie Emo, Laurent Markey, et al.. Optimized ICPCVD-Based TiO2 for Photonics. Materials, 2022, 15 (7), pp.2578. ⟨10.3390/ma15072578⟩. ⟨hal-03627764⟩
56 Consultations
41 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More