Effect of surface preparation on the corrosion of austenitic stainless steel 304L in high temperature steam and simulated PWR primary water - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Corrosion Science Année : 2012

Effect of surface preparation on the corrosion of austenitic stainless steel 304L in high temperature steam and simulated PWR primary water

Résumé

The corrosion behavior of 304L grade stainless steel (SS) in high-temperature steam and in a simulated Pressurized Water Reactor (PWR) is studied. The goal was to characterize the nature of the oxide coating generated during 500 h exposure of samples in a 400 °C steam (200 bar) or a 340 °C simulated PWR. Accelerating the effect of the steam environment as well as the influence of surface preparation have been studied. Two initial sample surfaces were used: mechanical polishing and finishing grinding. Oxide coatings were investigated using TEM imaging coupled with EELS spectroscopy and R – SIMS (Secondary Ion Mass Spectroscopy).
Fichier principal
Vignette du fichier
Laffont_5448.pdf (717.97 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-03531095 , version 1 (18-01-2022)

Identifiants

Citer

Sarata Cissé, Lydia Laffont, Benoit Tanguy, Marie-Christine Lafont, Eric Andrieu. Effect of surface preparation on the corrosion of austenitic stainless steel 304L in high temperature steam and simulated PWR primary water. Corrosion Science, 2012, 56, pp.209-216. ⟨10.1016/j.corsci.2011.12.007⟩. ⟨hal-03531095⟩
13 Consultations
55 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More