Strain path influence on size effects during thin sheet copper microforming - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue International Journal of Materials and Product Technology Année : 2013

Strain path influence on size effects during thin sheet copper microforming

Résumé

The influence of the size effects on the forming processes for micro-sized parts is not yet well known. This work follows experimental and numerical studies of the effect of a reduction in thickness (t) over grain size (d) ratio on the mechanical properties of high purity copper. Under tensile conditions, copper exhibits softer mechanical properties if t/d < 6, in agreement with previous results concerning Al or Ni. To assess the influence of complex loadings linked to forming processes on size effects, Nakazima tests were performed with 20 mm hemispherical punch on a universal sheet metal testing machine associated to a 3D video extensometer. Our results revealed that size effects are strongly sensitive to strain paths. Depending on these latter, the deterioration of the mechanical properties shown for tension is modified.
Fichier principal
Vignette du fichier
2013_International Journal Of Materials And Productucts Technology.pdf (588.25 Ko) Télécharger le fichier
Origine : Fichiers éditeurs autorisés sur une archive ouverte

Dates et versions

hal-03408659 , version 1 (13-03-2023)

Identifiants

Citer

Pierre Antoine Dubos, Eric Hug, Simon Thibault, Antoine Gueydan, Clément Keller. Strain path influence on size effects during thin sheet copper microforming. International Journal of Materials and Product Technology, 2013, 47 (1-4), pp.3-11. ⟨10.1504/IJMPT.2013.058964⟩. ⟨hal-03408659⟩
24 Consultations
22 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More