Characterizing the reactivation mechanisms of coseismic surface ruptures associated with the 2011 Mw 6.7 Fukushima-ken Hamadori earthquake in Japan through borehole hydromechanical testing - Archive ouverte HAL
Article Dans Une Revue Tectonophysics Année : 2021

Characterizing the reactivation mechanisms of coseismic surface ruptures associated with the 2011 Mw 6.7 Fukushima-ken Hamadori earthquake in Japan through borehole hydromechanical testing

Résumé

The reactivation mechanisms of coseismic surface ruptures associated with the 2011 Mw 6.7 Fukushima-ken Hamadori earthquake in Japan are investigated using in-situ controlled hydraulic injections in subsurface boreholes. Two fault segments were selected for reactivation studies, one across a coseismic rupture, the Shionohira site, and one across a non-coseismically ruptured segment, the Minakami-kita site. A series of water injections in sealed sections of boreholes set across the fault progressively bring the fault to rupture by a step-by-step decrease of the effective normal stress clamping the fault. While the fault is rupturing during these hydraulic stimulations, borehole displacements, fluid pressure and injection flowrate are continuously monitored. Then, the tests were analyzed using fully coupled hydromechanical modeling. The model was calibrated on field data, and a parametric study was conducted to examine the modes of fault reactivation. Coseismic surface rupture of the Shionohira fault showed a pure dilatant slip response to hydraulic tests, while the tectonically un-activated Itozawa fault (South) indicated a complex hybrid response to tests related to both a higher frictional and cohesive strengths of the fault. The analysis of the induced Shionohira slip event showed that it is reasonably modeled as a Coulomb rupture with an eventual dependency of friction on slip velocity, in good accordance with laboratory-derived rate-and-state friction data on the Shinohira gouge samples. In contrast, the Itozawa fault reactivation mechanism appears dominated by tensile failure with limited Coulomb shear failure. Thus, the applied protocol proves to be able to isolate significant differences in fault physical properties and rupture mechanisms between two segments of the same fault system, opening perspectives to better assess near-surface rupture effects, and therefore the safety of structures such as dams or nuclear waste repositories subject to large earthquakes.
Fichier principal
Vignette du fichier
Guglielmi_et_al_Tectonophysics_2021.pdf (6.28 Mo) Télécharger le fichier
Origine Publication financée par une institution

Dates et versions

hal-03375052 , version 1 (13-10-2021)

Identifiants

Citer

Yves Guglielmi, Kazuhiro Aoki, Paul Cook, Florian Soom, Frédéric Cappa, et al.. Characterizing the reactivation mechanisms of coseismic surface ruptures associated with the 2011 Mw 6.7 Fukushima-ken Hamadori earthquake in Japan through borehole hydromechanical testing. Tectonophysics, 2021, 819, pp.229084. ⟨10.1016/j.tecto.2021.229084⟩. ⟨hal-03375052⟩
49 Consultations
38 Téléchargements

Altmetric

Partager

More