Conducting interpenetrating polymer network sized to fabricate microactuators - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Applied Physics Letters Année : 2011

Conducting interpenetrating polymer network sized to fabricate microactuators

Résumé

Interpenetrating polymer networks can become successful actuators in the field of microsystems providing they are compatible with microtechnologies. In this letter, we report on a material synthesized from poly(3,4-ethylenedioxythiophene) and polytetrahydrofuran/poly(ethylene oxide) and microsized by decreasing its thickness to 12µm and patterning the lateral side using plasma etching at high etch rates and with vertical sidewalls. A chemical process and a “self degradation” are proposed to explain such etching rates. Preliminary actuation results show that microbeams can move with very large displacements. These microsized actuators are potential candidates in numerous applications, including microswitches, microvalves, microoptical instrumentation, and microrobotics. This research was financially supported by ANR under Grant No. ANR-09-BLAN-0110 and the Foundation d’Entreprise EADS.
Fichier principal
Vignette du fichier
Khaldi_2011_1.3581893.pdf (816.56 Ko) Télécharger le fichier
Origine : Fichiers éditeurs autorisés sur une archive ouverte

Dates et versions

hal-03286836 , version 1 (27-05-2022)

Identifiants

Citer

Alexandre Khaldi, Cedric Plesse, Caroline Soyer, Eric Cattan, Frederic Vidal, et al.. Conducting interpenetrating polymer network sized to fabricate microactuators. Applied Physics Letters, 2011, 98 (16), pp.164101. ⟨10.1063/1.3581893⟩. ⟨hal-03286836⟩
51 Consultations
56 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More