Influence of two APS coatings on the high-speed tribological behavior of a contact between titanium alloys - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Tribology International Année : 2019

Influence of two APS coatings on the high-speed tribological behavior of a contact between titanium alloys

Résumé

Contacts between titanium alloys may use an anti-fretting coating on one component. However violent events may cause severe sliding.In the high speed and pressure (up to 60 m/s and 280 MPa) sliding of a non-coated on a coated part, we investigate the influence of the coating (CoCrAlYSiBN or CuNiIn) on the friction coefficient, wear, and microstructural affectations. Both coatings did not significantly influence the friction coefficient but reduced the wear.A scenario based on interface-localized heat explaining the generation of a third body and its influence on the tribological behavior was proposed. The dependence of the mechanical and thermal affectations on the coating material was explained based on the kinetic of the α→β phase transformation of the Ti6Al4V alloy.
Fichier principal
Vignette du fichier
S0301679X19301501.pdf (2.09 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-03108919 , version 1 (22-10-2021)

Licence

Paternité - Pas d'utilisation commerciale

Identifiants

Citer

Mathieu Marquer, Sylvain Philippon, Laurent Faure, Guillaume Chassaing, Joffrey Tardelli, et al.. Influence of two APS coatings on the high-speed tribological behavior of a contact between titanium alloys. Tribology International, 2019, 136, pp.13-22. ⟨10.1016/j.triboint.2019.03.030⟩. ⟨hal-03108919⟩
100 Consultations
73 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More