Gas flow through a bore-piston ring contact
Résumé
This work reports on the derivation of simplified but accurate models to describe gas flow through a bore-piston ring
contact in reciprocating machines like compressors or IC engines. On the basis of the aperture field of a contact
deduced from real measurements carried out on an expanding ring in a bore, a scale analysis on the complete compressible
flow model is performed, assuming ideal gas law. It is shown that the flow can be treated as stationary and three
distinct flow regimes can be identified (namely incompressible, compressible creeping, and compressible inertial
regimes). Three dimensionless parameters characterizing these regimes are identified. While for the two former
regimes, classical analytical Poiseuille type of models are derived, an Oseen approximation is further employed for the
latter, yielding a quasi-analytical solution. The models are successfully compared to direct numerical simulations (DNS)
of the complete initial set of balance equations in their steady form performed on an aperture field of sinusoidal shape.
These simplified models are of particular practical interest since they allow an accurate gas flow-rate estimate through a
real contact using the aperture field as the geometrical input datum, together with the thermodynamic conditions (pressure
and temperature). This represents an enormous advantage as DNS is still very challenging in practice due to the
extremely small value of the contact aperture to contact length ratio.
Origine | Fichiers produits par l'(les) auteur(s) |
---|