A new method for choosing between ball-end cutter and toroidal cutter when machining free-form surfaces - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue International Journal of Advanced Manufacturing Technology Année : 2020

A new method for choosing between ball-end cutter and toroidal cutter when machining free-form surfaces

Jean-Max Redonnet
  • Fonction : Auteur
  • PersonId : 19747
  • IdHAL : jmr
Marcel Mongeau
Mohammed Sbihi

Résumé

End-milling of free-form surfaces on multi-axis CNC machines are complex and expensive operations involved in the production of many high-value parts, molds and stamping dies. For such operations, the choice of the cutter type to use is very important given the considerable impact of this choice on the quality of the machined surface and the duration of the operation. In this paper, a new method for choosing between ball-end cutter and toroidal cutter is provided. This procedure gives a good hint on the best tool to employ with no need to carry out any machining simulation.
Fichier principal
Vignette du fichier
ijamt2020.pdf (1.75 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-02981692 , version 1 (28-10-2020)

Identifiants

Citer

Mahfoud Herraz, Jean-Max Redonnet, Marcel Mongeau, Mohammed Sbihi. A new method for choosing between ball-end cutter and toroidal cutter when machining free-form surfaces. International Journal of Advanced Manufacturing Technology, 2020, 111 (5-6), pp.1425-1443. ⟨10.1007/s00170-020-06087-y⟩. ⟨hal-02981692⟩
122 Consultations
193 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More