Effects of functionalized halloysite on morphology and properties of polyamide-11/SEBS-g-MA blends - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue European Polymer Journal Année : 2017

Effects of functionalized halloysite on morphology and properties of polyamide-11/SEBS-g-MA blends

Résumé

Halloysite nanotubes (HNTs) were functionalized by grafting styrene-ethylene-butylene-styrene (SEBS) copolymer chains after a two-step modification procedure. Fourier transform infrared spectroscopy (FTIR), thermal gravimetric analysis (TGA) and pyrolysis-gas chromatography mass spectrometry (Py-GC/MS) were used to determine the grafting rate. Then, raw and functionalized halloysites were incorporated into polyamide-11(PA11)/styrene-ethylene-butylene-styrene grafted maleic anhydride (SEBS-g-MA) blends (85/15 w/w). Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) micrographs show a good dispersion of both halloysites particles and SEBS-g-MA nodules in the PA11 matrix. In the case of functionalized halloysite, the presence of HNTs bundles surrounded with fine SEBS-g-MA nodules is observed. Atomic force microscopy (AFM) also highlighted the different blends morphologies. Incorporation of functionalized halloysite leads to an improvement of the thermal properties without affecting the PAll crystallization. Moreover, mechanical performance, especially toughness, was highly improved in the presence of functionalized halloysite due to a good stress transfer from the matrix to the modified halloysite agglomerates surrounded by SEBS-g-MA.
Fichier principal
Vignette du fichier
effects-of-functionalized-halloysite-on-morphology.pdf (5.19 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-02892647 , version 1 (15-12-2020)

Identifiants

Citer

Mohamed Sahnoune, Aurélie Taguet, Belkacem Otazaghine, Mustapha Kaci, José-Marie Lopez-Cuesta. Effects of functionalized halloysite on morphology and properties of polyamide-11/SEBS-g-MA blends. European Polymer Journal, 2017, 90, pp.418-430. ⟨10.1016/j.eurpolymj.2017.03.008⟩. ⟨hal-02892647⟩
24 Consultations
108 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More