Single-fed circularly polarized dielectric resonator antenna using a uniaxial anisotropic material - Archive ouverte HAL Accéder directement au contenu
Communication Dans Un Congrès Année : 2019

Single-fed circularly polarized dielectric resonator antenna using a uniaxial anisotropic material

Résumé

A Dielectric Resonator Antenna operating in circular polarization is presented. The proposed antenna is formed by a uniaxial anisotropic dielectric and a ground plane. The optimization of the permittivity tensor and antenna dimensions is performed both theoretically and numerically using an Eigen mode analysis in Ansys HFSS. A good agreement is obtained for the resonant frequencies and quality factors of the different modes. The uniaxial anisotropic DRA radiates two degenerate orthogonal modes, TE111 x and TE111 y , with equal amplitudes and 90° phase difference in order to achieve circular polarization. An impedance bandwidth of 9.8% is accomplished and a broadside radiation pattern with left-hand circular polarization (LHCP) is achieved in simulation. Furthermore, an Axial Ratio (AR) of 0.06 dB at 2.45 GHz and a 3-dB AR bandwidth of 2.04% are obtained. The maximum simulated directivity is equal to 6.56 dBi.
Fichier principal
Vignette du fichier
IET_ APC2020_Anisotropic_DRA.pdf (546.05 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-02456138 , version 1 (27-01-2020)
hal-02456138 , version 2 (23-03-2021)

Identifiants

Citer

Carlos David Morales Peña, Christophe Morlaas, Alexandre Chabory, Romain Pascaud, Marjorie Grzeskowiak, et al.. Single-fed circularly polarized dielectric resonator antenna using a uniaxial anisotropic material. APC 2019, The IET Conference on Antennas and Propagation, Nov 2019, Birmingham, United Kingdom. ⟨10.1049/cp.2019.0713⟩. ⟨hal-02456138v2⟩
191 Consultations
393 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More