Etude à haute température de quelques comportements thermiques et microstructuraux pour trois alliages à base de nickel alliés avec du cobalt - Archive ouverte HAL Accéder directement au contenu
Pré-Publication, Document De Travail Année : 2020

Investigation at elevated temperature of some thermal and microstructural behaviours for three nickel-based alloys alloyed with cobalt

Etude à haute température de quelques comportements thermiques et microstructuraux pour trois alliages à base de nickel alliés avec du cobalt

Lionel Aranda
Patrice Berthod

Résumé

Three nickel-based alloys, containing chromium to resist high temperature oxidation and hot corrosion, carbon and tantalum to allow the formation of tantalum carbides with a fraction high enough to favour high mechanical properties at high temperature, as well as cobalt in two distinct contents, were produced by classical foundry. The obtained alloys were subjected to three tests of different type, aiming to observe their behaviours at high temperature, with special attention to the influence of the cobalt content on these properties. These tests were differential thermal analysis, thermodilatometry and long isothermal exposure at high temperature. The effect of the cobalt content on the melting temperature range, on the average thermal expansion coefficient and on the evolution of the characteristics of the carbides at high temperature are analyzed and discussed.
Trois alliages basés sur le nickel, contenant du chrome en quantité suffisante pour résister à l’oxydation à haute température et à la corrosion à chaud, du carbone et du tantale pour permettre la présence dans leurs microstructures de carbures de tantale avec une fraction suffisante pour présenter une bonne résistance mécanique à haute température, ainsi que du cobalt avec deux différentes teneurs, ont été élaborés par fonderie classique. Ils ont fait l’objet de trois expériences différentes visant à connaître leurs comportements à haute température, avec une attention particulière pour l’effet de la teneur en nickel sur ces propriétés. Ces expériences ont été l’analyse thermique différentielle, la thermodilatométrie et l’exposition isotherme prolongée à haute température. Les effets de la teneur en cobalt sur l’intervalle de fusion, sur le coefficient de dilatation thermique moyen et sur l’évolution des caractéristiques des carbures à haute température ont été étudiés et sont commentés.
Fichier principal
Vignette du fichier
HAL5 PB200507 AnalThermAlliagesNickelAvecCo hal-02566390.pdf (841.21 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-02566390 , version 1 (07-05-2020)
hal-02566390 , version 2 (15-05-2020)

Identifiants

  • HAL Id : hal-02566390 , version 2

Citer

Lionel Aranda, Patrice Berthod, Jean-Paul K Gomis. Etude à haute température de quelques comportements thermiques et microstructuraux pour trois alliages à base de nickel alliés avec du cobalt. 2020. ⟨hal-02566390v2⟩
75 Consultations
56 Téléchargements

Partager

Gmail Facebook X LinkedIn More