Effect of continuous strain path changes on forming limit strains of DP600 - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Strain Année : 2019

Effect of continuous strain path changes on forming limit strains of DP600

Résumé

The strain path may change in actual sheet metal forming processes, so the determination of formability of sheet metal should consider the non-linear strain path. For identifying the forming limit (FL) strains under non-linear strain path, a conventional two-step procedure with unloading is classically used to produce the strain path change, which results in no continuous measure of strain. The in-plane biaxial tensile test with a cruciform specimen is an interesting alternative to overcome the drawbacks of conventional method. The strain path change can be made without unloading during a single test. In this work, the experimental FL strains of DP600 sheets under two types of non-linear strain path are investigated and then compared with those under linear strain paths. The Oyane ductile fracture criterion is used in the finite element simulation to predict the experimental results.
Fichier principal
Vignette du fichier
2019-STR-Song et al (Version difusee).pdf (8.37 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-02328681 , version 1 (23-10-2019)

Identifiants

Citer

Xiao Song, L. Leotoing, Dominique Guines, Eric Ragneau. Effect of continuous strain path changes on forming limit strains of DP600. Strain, 2019, 55 (6), ⟨10.1111/str.12329⟩. ⟨hal-02328681⟩
16 Consultations
57 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More