Influence of Pluronic® P123 Addition in the Synthesis of Bulk Ni Promoted MoS2 Catalyst. Application to the Selective Hydrodesulfurization of Sulfur Model Molecules Representative of FCC Gasoline - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Catalysts Année : 2019

Influence of Pluronic® P123 Addition in the Synthesis of Bulk Ni Promoted MoS2 Catalyst. Application to the Selective Hydrodesulfurization of Sulfur Model Molecules Representative of FCC Gasoline

Etienne Girard
  • Fonction : Auteur
  • PersonId : 935174

Résumé

A way to improve hydrotreatment processes is to enhance the intrinsic activity of Ni or Co promoted MoS 2 catalysts that are commonly used in such reactions. The aim of this work was to investigate the impact of the presence of Pluronic ® P123 as a structuring agent during the synthesis of Ni promoted MoS 2 catalysts (named NiMoS) in water at room temperature. A series of analyses, i.e., X-ray diffraction (XRD), chemical analysis, inductively coupled plasma mass spectrometry (ICP-MS), nitrogen adsorption-desorption isotherms, transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS), helped in characterizing the NiMoS-P123 and NiMoS catalysts, the latter being prepared in the absence of polymer. Both compounds contained MoS 2 phase (~85 atomic% considering Mo atoms), a similar amount of mixed Ni-Mo-S phase (40-50% considering Ni) and some amount of NiS and Ni-oxidized impurity phases. The main differences between the two catalysts were a much larger specific surface area (126 m 2 ·g −1 instead of 31 m 2 ·g −1) and a better dispersion of the active phase as shown by the lower slab stacking (2.7 instead of 4.8) for NiMoS-P123, and the presence of C in NiMoS-P123 (9.4 wt.% instead of 0.6 wt.%), indicating an incomplete decomposition of the polymer during thermal treatment. Thanks to its larger specific surface area and lower slab stacking and therefore modification of active Mo site properties, the compound prepared in the presence of Pluronic ® P123 exhibits a strong increase of the catalytic activity expressed per Mo atom for the transformation of 3-methylthiophene. Such improvement in catalytic activity was not observed for the transformation of benzothiophene likely due to poisonous residual carbon which results from the presence of Pluronic ® P123 during the synthesis.
Fichier principal
Vignette du fichier
catalysts-09-00793.pdf (5.12 Mo) Télécharger le fichier
Origine : Publication financée par une institution
Loading...

Dates et versions

hal-02320070 , version 1 (06-12-2019)

Licence

Paternité

Identifiants

Citer

Valentin Hetier, Diego Peña, Alexandre Carvalho, Laurence Courthéoux, Valérie Flaud, et al.. Influence of Pluronic® P123 Addition in the Synthesis of Bulk Ni Promoted MoS2 Catalyst. Application to the Selective Hydrodesulfurization of Sulfur Model Molecules Representative of FCC Gasoline. Catalysts, 2019, 9 (10), pp.793. ⟨10.3390/catal9100793⟩. ⟨hal-02320070⟩
78 Consultations
55 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More