Wafer level packaging compatible with millimeter-wave antenna - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Sensors and Actuators A: Physical Année : 2012

Wafer level packaging compatible with millimeter-wave antenna

Résumé

his paper presents a technological process compatible process compatible with an above integrated circuit (IC) to achieve a millimeter wave antenna structure that is well-suited for wafer level packaging technology. The radiating patch is introduced inside of the air cavity of packaging. This structure consists of two dielectric substrates and benzocyclobutene (BCB) sealing rings at the wafer level. The wafer level packaging that holds the radiating patch is made of Pyrex, a low permittivity substrate. The millimeter-wave antenna using the micromachining technology is excited by a coplanar waveguide fed aperture (CPWFA). This feeding mechanism is designed and realized on GaAs, a high permittivity substrate. The electromagnetic energy of the CPWFA to the radiating patch is made through a coupling slot. The fabricated antenna of 6 mm × 6 mm, including the ground plane, exhibits a 10 dB bandwidth of 3 GHz from 50.5 GHz to 53.5 GHz. The design has been driven by the interest of collective encapsulation of MEMS and MMICs devices.

Dates et versions

hal-00788267 , version 1 (14-02-2013)

Identifiants

Citer

Etienne Herth, Seonho Seok, Nathalie Rolland, T. Lasri. Wafer level packaging compatible with millimeter-wave antenna. Sensors and Actuators A: Physical , 2012, 173, pp.238-243. ⟨10.1016/j.sna.2011.09.040⟩. ⟨hal-00788267⟩
29 Consultations
0 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More