E. Abhilash, M. A. Joseph, and K. P. , Prediction of Dendritic Parameters and Macro Hardness Variation in Permanent Mould Casting of Al-12FDMP, Fluid Dynamics & Material Processing, vol.2, pp.211-220, 2006.

S. Akamatsu and G. Faivre, Traveling waves, two-phase fingers, and eutectic colonies in thin-sample directional solidification of a ternary eutectic alloy, Physical Review E (Statistical Physics, Plasmas, Fluids, and Re Interdisciplinary Topics), vol.61, pp.3757-3769, 2000.

S. Akamatsu, S. Bottin-rousseau, and G. Faivre, La dynamique de solidification des eutectiques lamellaires : des échantillons minces aux systèmes massifs, J. Phys. 1V France, vol.11, pp.6-127, 2001.

S. Akamatsu, M. Faivre, G. Karma, and A. , Pattern stability and trijunction motion in eutectic solidification, Phys. Rev. E, pp.3050-3051, 2002.

S. Akamatsu, M. Plapp, G. Faivre, and A. Karma, Over stability of lamellar eutectic growth below the minimum-undercooling spacing, Met. Mat Trans, vol.35, pp.1815-1228, 2004.

G. Amberg and J. Shiomi, Thermocapillary flow and phase change in some widespread materials processes, FDMP: Fluid Dynamics & Materials Processing, vol.1, pp.81-95, 2005.

D. Benielli, M. El-ganaoui, E. Semma, N. Bergeon, H. Jamgotchian et al., Effect of the thermal convection on directional solidification of succinonitrile-acetone alloy: Comparison between experimental and numerical studies, J. Phys. IV France, vol.11, pp.6-135, 2001.

D. Benielli, N. Bergeon, H. Jamgotchian, B. Billia, and P. Voge, Free growth and in stability morphologies in directional melting of alloys, Phys. Rev. E, vol.65, pp.51604-51605, 2002.

R. Bennacer, M. Li-ganaoui, A. A. Mohammad, and P. Fauchais, Computational analysis of Marangoni effects during floating zone growth under micro-gravity conditions, Progress in Transport Phenomena, pp.559-564, 2002.

R. Bennacer, M. El-ganaoui, and E. Semma, Quelques paramètres de contrôle de la convection thermo-capillaire en croissance par fusion de zone en microgravité, Comptes Rendus Mecanique, vol.332, issue.6, pp.447-456, 2004.

A. Bergeon, D. Henry, and H. Benhadid, Marangoni-Bénard instability in microgravity conditions with Soret effect, International Journal of Heat and Mass Transfer, vol.37, p.1545, 1994.

C. Berne, A. Pasturel, and B. Vinet, , 2001.

, Germination et sélection de phases dans les métaux et alliages réfractaires: approches expérimentales en tube à chute libre et théorique par calculs ab initio, J. Phys. IV France, vol.11, pp.6-19

D. Camel and E. Arquis, Structural effects of convective flows in dendritic solidification" -Numerical modelling, EUROMECH 284 on Fluid Flow Phenomena in Crystal Growth, pp.13-16, 1992.

D. Camel and M. D. Dupouy, Comparative study of the columnar-equiaxed transition in microgravity and on ground during directional solidification of a refined Al-15 wt% Ni alloy, J. Phys. IV France, vol.11, pp.6-119, 2001.

P. Casai, La théorie du second gradient et la capillarité, C.R. Acad. Sci, vol.274, pp.157-158, 1972.

S. Chandrasekhar, Hydrodynamic and hydro-magnetic stability, 1961.

J. M. Debierre, A. Karma, F. Celestini, and R. Guérin, Phase field approach for facetted directional solidification, Phys. Rev. E, vol.68, pp.41604-41605, 2003.

M. El-gamma and J. M. Floryan, Thermocapillary Effects in Systems with Variable Liquid Mass Exposed to Concentrated Heating, FDMP: Fluid Dynamics & Materials Processing, vol.2, pp.17-26, 2006.

M. El-ganaoui, Computational modeling of heat mass and solute transport in solid/liquid transition systems on earth and on microgravity environment, Mecanica Computational XXI, pp.2587-2592, 2002.

E. Ganaoui, M. Lamazouade, A. Bontoux, P. , and M. D. , Computational solution for fluid flow under solid/liquid phase change conditions, Int. J, Computers and Fluids, vol.31, issue.7, pp.539-556, 2002.
URL : https://hal.archives-ouvertes.fr/hal-00838453

J. J. Favier and D. Camel, Analytical and experimental study of transport processes during directional solidification and crystal growth, J. Crystal Growth, vol.79, pp.50-62, 1986.

R. Gatignol, A. Prud'homme-;-gelfgat, . Yu, A. Rubinov, P. Z. Bar-yoseph et al., World Scientific, On the Three-Dimensional Instability of Thermocapillary Convection in Arbitrarily Heated Floating Zones in Microgravity Environment. FDMP: Fluid Dynamic: & Materials Processing, vol.1, pp.21-32, 2001.

C. Giessler, C. Sievert, I. L. Krieger, B. Halbedel, D. Huelsenberg et al., A Model for Electromagnetic Control of Buoyancy Driven Convection in Glass Melts FDMP: Fluid Dynamics & Materials Processing, vol.1, pp.247-266, 2005.

H. Gouin, Energy of interaction between solid surfaces and liquids, J. Phys. Chem. B, vol.102, pp.1212-1218, 1998.
URL : https://hal.archives-ouvertes.fr/hal-00222180

B. Goyeau, T. Benihaddadene, D. Gobin, and M. Quintard, Numerical calculation of the permeability in a dendritic mushy zone, Metallurgical & Materials Transactions, vol.30, pp.613-622, 1999.

R. Guérin, M. El-ganaoui, P. Haldenwang, and P. Bontoux, Finite volume and spectral methods applied to Pb-30%Tl alloy solidification, J. Phys. IV France, vol.11, pp.151-159, 2001.

C. P. Hong, M. F. Zhu, and S. Y. Lee, Modeling of Dendritic Growth in Alloy Solidification with Melt Convection, FDMP: Fluid Dynamics & Materials Processing, vol.2, pp.247-260, 2006.

K. A. Jackson and J. D. Hunt, Acta Metall, vol.13, pp.1212-1215, 1965.

D. Jamet and P. Ruyer, A quasi incompressible model dedicated to the direct numerical simulation of liquid-vapor flows with phase-change, 52th International Conference on Multiphase Flow, ICMF'04, 2004.

K. Kakimoto and L. Liu, Flow Instability of Silicon Melt in Magnetic Fields, FDMP: Fluid Dynamics & Materials Processing, vol.2, pp.167-174, 2006.

A. Karma, Microstructural pattern formation during solidification, Introduction à la session 2 (Solidification et croissance cristalline) du Colloque " Sciences de la matière et microgravité 14-15 mai, 2001.

C. W. Lan and B. C. Yeh, Effects of rotation on heat flow, segregation. and zone shape in a small-scale floating-zone silicon growth under axial and transversal magnetic fields, FDMP: Fluid Dynamics & Materials Processing, vol.1, issue.1, pp.33-44, 2005.

L. Landau and E. Lifschitz, Mécanique des fluides, 1971.

M. Lappa, On the nature and structure of possible three-dimensional steady flows in closed and open parallelepipedal and cubical containers under different heating conditions and driving forces, FDMP: Fluid Dynamics & Materials Processing, vol.1, issue.1, p.19, 2005.

M. Lappa, Review: Possible strategies for the control and stabilization of Marangoni flow in laterally heated floating zones, FDMP: Fluid Dynamics & Materials Processing, vol.1, issue.2, pp.171-189, 2005.

J. S. Langer, Recent developments in the theory of pattern formation, Physica A: Statistical and Theoretical Physics, vol.140, pp.44-50, 1986.

P. Lehmann, T. Alboussière, R. Moreau, and V. Uspenski, MMD convection control applied to chemical diffusivities measurements, J. Chim. Phys, vol.96, pp.1105-1110, 1999.

Y. R. Li, L. Peng, W. Y. Shi, and N. Imaishi, Convective instability in annular pools, FDMP: Fluid Dynamics & Materials Processing, vol.2, pp.53-166, 2006.

A. Ludwig, M. Gruber-pretzler, M. Wu, A. Kuhn, and J. Riedle, About the Formation of Macro segregations During Continuous Casting of Sn-Bronze, FDMP: Fluid Dynamics & Materials Processing, vol.1, issue.4, pp.285-300, 2005.

D. V. Lyubimov, A. A. Cherepanov, T. Lyubimova, and B. Roux, Orienting effect of vibrations on interfaces, CR. Acad. Sci, vol.320, pp.225-230, 1997.

N. Ma and J. S. Walker, Electromagnetic Stirring in Crystal Growth Processes, FDMP: Fluid Dynamics & Materials Processing, vol.2, pp.119-126, 2006.

K. Matsunaga and H. Kawamura, Influence of Thermocapillary Convection on Solid-liquid Interface FDMP: Fluid Dynamics & Materials Processing, vol.2, pp.59-64, 2006.

W. W. Mullins and R. E. Sekerka, , 1964.

, J. Appl. Phys, vol.35, p.444

J. Narski and M. Picasso, Adaptive 3D finite elements with high aspect ratio for dendritic growth of a binary alloy including fluid flow induced by shrinkage, FDMP: Fluid Dynamics & Materials Processing, vol.3, issue.1, pp.49-64, 2007.
URL : https://hal.archives-ouvertes.fr/hal-01881526

H. Nguyen-thi, Y. Dabo, B. Billia, D. Camel, and . Drevet, Solidification dirigée d'alliages Al-3,5 %pds Ni; analyse des étapes préliminaires de fusion et de stabilisation, J. Phys. IV France, vol.11, pp.6-61, 2001.

H. Nguyen-thi, B. Drevet, J. M. Debierre, D. Camel, Y. Dabo et al., Preparation of the initial solid-liquid interface and melt in directional solidification, J. Crystal Growth, vol.253, pp.539-548, 2003.

D. A. Nield, Surface tension and buoyancy effects in cellular convection, J. Fluid Mech, vol.19, pp.341-352, 1964.

M. Plapp and A. Karma, Eutectic colony formation: A stability analysis, Physical Review E (Statistical Physics, Plasmas. Fluids, and Related Interdisciplinary Topics, vol.60, pp.6865-6889, 1999.

M. Plapp and A. Karma, Eutectic colony formation: A phase field study, Phys. Rev. E, pp.6-061608, 2002.
URL : https://hal.archives-ouvertes.fr/hal-00133160

M. Plapp and M. Dejmek, Stability of hexagonal solidification patterns, Europhysics Lett, vol.65, pp.276-282, 2004.
URL : https://hal.archives-ouvertes.fr/hal-00133163

R. Prud'homme, D. Langevin, G. Faivre, and . Eds, Sciences de la Matière et Microgravité, Colloque 86, J. Phys. IV France, p.11, 2001.

R. Prud'homme and B. Zappoli, Bilan à quatre ans, 2000.

, Phénomènes de Transport et Transitions de Phase en Micropesanteur

R. Prud'homme, M. Ganaoui, C. R. Microgravity, and . Acad, , 2004.

. Meca,

R. Prud'homme, L'intérêt de l'outil microgravité pour la mécanique des fluides et ses applications, Mécanique et Industries, vol.5, issue.3, pp.339-351, 2004.

R. Prud'homme and M. Ganaoui, On some basic considerations of solid/liquid transition models under microgravity environment, Int. J. Materials and Product Technology, pp.213-225, 2004.

R. Prud'homme, M. Ganaoui, and . Eds, Numéro thématique "Microgravité et Transferts" Mécanique et Industries, 5 N° 5, 2004.

S. Punjabi, K. Muralidhar, and P. K. Panigrahi, Influence of Layer Height on Thermal Buoyancy Convection in A System with Two Superposed Fluids Confined in A Parallelepipedal Cavity, FDMP: Fluid Dynamics and Materials Processing, vol.2, pp.95-106, 2006.

L. E. Scriven and C. Sternling, On cellular convection driven by surface-tension gradients: effects of mean surface tension and surface viscosity, Chem. Engng. Mech, vol.19, p.340, 1964.

P. Seppecher, Etude d'une modélisation des zones capillaires fluides : Interfaces et lignes de contact, Int. J. Heat Mass Transf, vol.43, pp.1905-1923, 1987.

V. Timchenko, R. Bennacer, E. Leonardi, and D. De-vahl, The influence of Soret effect on morphological instability during directional solidification of a binary alloys, pp.611-616, 2002.

R. Touhiri, H. Benhadid, and D. Henry, Stabilisation par champ magnétique de la convection en cavité cylindrique chauffée par le bas, J. Chim. Phys, vol.96, pp.1098-1104, 1999.

T. Tsukada, M. Kobayashi, C. J. Jing, and N. Imaishi, Numerical simulation of CZ crystal growth of oxide, FDMP: Fluid Dynamics & Materials Processing, vol.1, issue.1, pp.45-62, 2005.