Four-leg Ca0.95Sm0.05MnO3 unileg thermoelectric device - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Journal of Applied Physics Année : 2008

Four-leg Ca0.95Sm0.05MnO3 unileg thermoelectric device

Résumé

A prototype of oxide thermoelectric module only composed of n-legs Ca0.95Sm0.05MnO3, so-called unileg device, has been fabricated. The electrical and thermal measurements have been investigated at high temperature in air. In this non conventional configuration, the pellets are thermally connected in parallel, electrically in series, and linked by silver strips. The system has been characterized under large temperature difference (ΔT=360K) using a homemade system, allowing to record simultaneously the electrical and thermal parameters of the working device. An open circuit voltage of 260mV was obtained for a four-leg “unileg” module. The module exhibits an internal resistance of 1.09Ω. The maximum power output for this four-leg device reached 16mW in these working conditions. The manufacturing quality is discussed, according to the electric contact resistance values, and the reliability of the thermoelectric device is reported.
Fichier non déposé

Dates et versions

hal-02149870 , version 1 (06-06-2019)

Identifiants

Citer

Sébastien Lemonnier, Christophe Goupil, Jacques Noudem, Emmanuel Guilmeau. Four-leg Ca0.95Sm0.05MnO3 unileg thermoelectric device. Journal of Applied Physics, 2008, 104 (1), pp.014505. ⟨10.1063/1.2951796⟩. ⟨hal-02149870⟩
39 Consultations
0 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More