Compensation of machining errors of Bspline and Cspline - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue International Journal of Advanced Manufacturing Technology Année : 2018

Compensation of machining errors of Bspline and Cspline

Résumé

The evolution of the interpolation methods towards a very high technicality requires a good choice of used type in the operation of high-speed milling (HSM). The “Bspline” and “Cspline” interpolations present good solutions to guarantee the tool’s continuous movement during machining. However, in a previous article, we have shown by a simulation tool that they generate significant dimensional errors that decrease the precision of the machined part. In this article, a method of compensating for these errors based on the insertion of the nodes, while respecting the predefined tolerance, has been developed. To do this, we have modeled and simulated machining errors before and after compensation for each type of interpolation. To validate our results,we have machined a test piece with the compensated and uncompensated Bspline and Cspline interpolations on theHuron KX10 machine and we have measured the corresponding machining errors. The results have shown that the method of compensation by the insertion of the nodes causes a significant reduction of the machining errors.
Fichier principal
Vignette du fichier
Msaddek_21338.pdf (1.7 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-02082154 , version 1 (28-03-2019)

Identifiants

Citer

El Bechir Msaddek, Maher Baili, Zoubeir Bouaziz, Gilles Dessein. Compensation of machining errors of Bspline and Cspline. International Journal of Advanced Manufacturing Technology, 2018, 97 (9-12), pp.4055-4064. ⟨10.1007/s00170-018-2160-1⟩. ⟨hal-02082154⟩
18 Consultations
24 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More