Adsorption of hydrogen sulfide (H 2 S) on zeolite (Z): Retention mechanism - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Chemical Engineering Journal Année : 2016

Adsorption of hydrogen sulfide (H 2 S) on zeolite (Z): Retention mechanism

Léa Sigot
  • Fonction : Auteur
  • PersonId : 774017
  • IdRef : 185160875
Gaëlle Ducom
Patrick Germain

Résumé

Zeolites are efficient adsorbents for the removal of hydrogen sulfide (H2S) – a trace compound commonly found in biogas. The assessment of zeolite regeneration potential is an important point to consider before using them in adsorption processes for biogas treatment. In this study, it was first shown that after adsorption of H2S, by heating a 13X zeolite at 350 °C, the desorbed quantities of sulfur compounds were very low. Afterwards, the objective was to understand H2S removal mechanism. Complementary physicochemical characterizations of the studied zeolite before and after H2S adsorption were performed: specific surface area, porosity, pH, infrared spectroscopy, thermogravimetry and differential scanning calorimetry. The speciation of sulfur in the studied zeolite after H2S adsorption was investigated and a retention mechanism was proposed. It was demonstrated that H2S was converted in elemental sulfur in the zeolite. This mechanism involves H2S adsorption at the zeolite surface, dissolution and dissociation of H2S in pore water, and oxidation to form elemental sulfur that can polymerize. The major formation of elemental sulfur limits the thermal regeneration of the studied zeolite and other regeneration methods should be considered.
Fichier non déposé

Dates et versions

hal-01962340 , version 1 (20-12-2018)

Identifiants

  • HAL Id : hal-01962340 , version 1

Citer

Léa Sigot, Gaëlle Ducom, Patrick Germain. Adsorption of hydrogen sulfide (H 2 S) on zeolite (Z): Retention mechanism. Chemical Engineering Journal, 2016, 287, pp.47-53. ⟨hal-01962340⟩
179 Consultations
0 Téléchargements

Partager

Gmail Facebook X LinkedIn More