Experimental Investigation of the Dynamic Behavior of High Speed Machining Spindles with an Electromagnetic Excitation Device - Archive ouverte HAL Accéder directement au contenu
Communication Dans Un Congrès Année : 2015

Experimental Investigation of the Dynamic Behavior of High Speed Machining Spindles with an Electromagnetic Excitation Device

Résumé

Frequency Response Function measurements are carried out on two different industrial HSM Spindles rotating up to 24000rpm and powered from 40 to 70kW. An electromagnetic excitation device capable of applying a dynamic force to ±80N at 5kHz is used to perform the experiment. Measurements are made on four points by two displacement sensors and two accelerometers. A specific signal processing method that uses the cepstrum of the signal is applied to remove harmonics of the rotation in the signal. Variations of the dynamic behavior of the spindles with speed are observed and analyzed.
Fichier principal
Vignette du fichier
Rabreau15LEM21.pdf (562.53 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-01819024 , version 1 (08-11-2019)

Identifiants

Citer

Clement Rabreau, David Tlalolini, Mathieu Ritou, Sébastien Le Loch, Benoît Furet. Experimental Investigation of the Dynamic Behavior of High Speed Machining Spindles with an Electromagnetic Excitation Device. International Conference on Leading Edge Manufacturing in 21st century (LEM21), Oct 2015, Kyoto, Japan. pp.0202-1-6, ⟨10.1299/jsmelem.2015.8._0202-1_⟩. ⟨hal-01819024⟩
98 Consultations
140 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More